Foot anchor with a forged foot,are by mean of their construction specially suitable for slender concrete units and for the installation in thin walls,like as garages,transformer stations,shaft rings,etc.
Into socket of stainless steel,a metric round thread is cut in ,which should be greased well before the installation into the precast concrete unit.
For fastening to a steel formwork to prevent dirt and concrete from penetrating into the thread of the socket,plastic stoppers,respectively holding discs are used.
The lengths of the anchors can be changed,matching to your special installation case.here,however,you should consider that the load may change.
| Article No. |
Spec. |
Available Surface |
| ABS-FAS-12130 |
Rd12x1300mm 1.3T |
Electro Galv. |
| ABS-FAS-16200 |
Rd16x200mm 2.5T |
| ABS-FAS-20258 |
Rd20x258mm 4.0T |
| ABS-FAS-24325 |
Rd24x325mm 5.0T |
| ABS-FAS-30400 |
Rd30x400mm 7.5T |
| ABS-FAS-36475 |
Rd36x475mm 10.0T |
| ABS-FAS-42550 |
Rd42x550mm12.5T |
| ABS-FAS-52575 |
Rd52x575mm15.0T |
Both rod bar socket with foot and rebar socket with foot are available.
Audited Supplier 
){kind=link}
){kind=link}